make money online






place your ads here

Friday, 9 December 2011

BMW i8 eclectric 2011

Concept Vision Efficient Dynamics

   he Vision Efficient Dynamics concept car is a plug-in hybrid with a three cylinder turbodiesel engine.[3Additionally, there are two electric motors with 139 horsepower. It allows an acceleration to 100 km/h (62 mph) in 4.8 seconds and an electronically limited top speed of 250 km/h (160 mph)
According to BMW, the average fuel consumption in the EU test cycle (KV01) is 3.76 liters/100 kilometers, (75.1 mpg imp), and has a carbon dioxide emission rating of 99 grams per kilometer (1,3 l/100km and 33g CO2/km ; EU-PHEV ECE-R101). The estimated all-electric range is 50 km (31 mi), and the 24-litre diesel tank extends the total vehicle range to up to 700 km (430 mi).[5] The lightweight chassis is made mainly from aluminium. The windshield, top, doors and fenders are made from polycarbonate glass, with the body having a drag coefficient of 0.22.[8]

Pre-production version

The BMW i8 concept plug-in hybrid electric vehicle unveiled at the 2011 Frankfurt Motor Show has a 7.2 kWh lithium-ion battery pack that allows an all-electric range of 35 km (22 mi). Its top speed is electronically limited to 250 km/h (160 mph) and is expected to go from 0 to 100 kph (0 to 60 mph) in 4.6 seconds. Under normal driving conditions the i8 is expected to deliver 80 mpg-US (2.9 L/100 km; 96 mpg-imp) under the European cycle. A full charge of the battery will take less than 2 hours using 220V.
The i8 combines the electric drive system of the BMW i3, with a 96 kW (129 hp) electric motor located in the front axle powering the front wheels and at the rear is a turbocharged 1.5-liter 3-cylinder gasoline engine producing 164 kW (220 hp) and 300 Nm (221 lb-ft) of torque. The result is a combined output of 260 kW (349 hp). All four wheels provide regenerative braking. The location of the battery pack in the energy tunnel gives the vehicle a low centre of gravity, enhancing its dynamics. Together with the positioning of the motor and engine over the axles, the result is an optimum 50/50 weight distribution.

No comments:

Post a Comment